Factory and warehouse ductwork cleaned by certified crews across Denton County

Industrial Air Duct Cleaning in Lewisville built for plants that cannot shut down

Industrial Air Duct Cleaning in Lewisville is heavy-duty ductwork cleaning for manufacturing plants, warehouses and commercial buildings, and we run it around your production schedule instead of against it. If your Corporate Drive Corridor facility is pulling dust through the returns, or a plant duct cleaning in Lewisville Texas crew is needed before an inspection, we scope the system, clean it with negative air containment, and hand you documentation. Call (214) 644-8299.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Dependable Air Duct cleaning across Lewisville, Texas
Careful work. Honest options.
About this service

What Industrial Air Duct Cleaning in Lewisville Actually Involves

Industrial Air Duct Cleaning in Lewisville is the mechanical removal of dust, debris, product residue and microbial growth from large-diameter supply, return and exhaust ductwork serving manufacturing and warehouse spaces. It is not a shop vac and a ladder. We seal the system, pull it under negative pressure with a truck- or trailer-mounted negative air machine, then run rotary brush systems, air whips and compressed air nozzles through every branch line while a HEPA vacuum catches what comes loose.

Lewisville facilities run hard. Sheet metal and flexible duct in plants along the I-35E corridor collects metal shavings, cardboard fiber, packaging dust and, in food-adjacent buildings, flour and starch that sticks to duct walls like paste. That buildup restricts airflow, drags down evaporator coil performance and pushes allergens into the breathing zone of your crew. If you have been searching industrial duct cleaning near me Lewisville and getting residential outfits, that is the gap we fill.

  • ✓ Lower Static Pressure
  • ✓ Fewer Air Quality Complaints
  • ✓ Cleaner Coils, Longer Life
  • ✓ Documented Compliance
What's included

What Is Included in Industrial Duct Cleaning in Lewisville

Every industrial job we quote includes the core scope below. Add-ons like fogger treatment, dryer vent lint blockage removal and full indoor air quality services are priced separately and listed clearly on the written scope before we start.

✓

Full Duct Mechanical Cleaning

Every supply, return and exhaust trunk and branch line gets cleaned with rotary brush systems, air whips or compressed air nozzles depending on duct material and diameter. Flexible duct, sheet metal duct and fabric DuctSox runs each get the appropriate tool for the job.

✓

Negative Air Containment

We tie a negative air machine into the trunk line and stage HEPA vacuum units at collection points. The system stays under negative pressure for the entire cleaning, so nothing escapes into occupied space. Adjacent production areas stay sealed and clean.

✓

Coil and Blower Service

Evaporator coils get cleaned with coil cleaner, condensate pans get flushed, and blower wheels get inspected for imbalance and buildup. Dirty evaporator coils are the most common cause of high static pressure after duct cleaning, so we handle them in the same visit.

✓

Access Panel Installation

Where the duct system lacks service access, we cut and install access panels at strategic points so future cleanings and inspections do not require duct demolition. Every panel is resealed with mastic or foil tape to code and marked on the documentation.

✓

Documentation Packet

You receive before-and-after photos from the duct inspection camera, static pressure readings at the air handler, debris volume removed, access panel locations and recommended re-clean interval. This is the file your auditor, insurer or corporate office will ask for.

How it works

How Our Industrial Duct Cleaning Process Runs

01

Site Walkthrough

We walk the facility with your maintenance lead, map every trunk and branch line, and identify the air handlers, rooftop units and exhaust risers feeding the space. You get a written scope with duct linear footage, access panel locations and a firm price before anyone touches a tool. Walkthroughs run 45 to 90 minutes on a typical 40,000 square foot building.

02

Containment Setup

Before cleaning starts, we isolate the zone. Registers get covered, negative air machines are tied into the trunk line, and HEPA vacuum units are staged at the collection points. Production areas adjacent to the work zone stay sealed off. Setup usually takes two to three hours on a mid-size plant and happens before your first shift or after your last one.

03

Mechanical Cleaning

Crews run rotary brush systems through sheet metal duct and switch to air whips and compressed air nozzles on flexible duct and tight radius runs. Every access point gets worked in sequence so debris travels toward the vacuum, never back into the occupied space. A 200-foot trunk line takes roughly three to four hours with a two-person crew.

04

Coil and Component Service

While the system is open, we clean evaporator coils with coil cleaner, check blower wheels for imbalance, inspect vent covers and verify that every access panel we cut is resealed with mastic or foil tape to code. Duct sealant goes on any joint that was leaking. This is the stage where most airflow gains get locked in.

05

Verification and Handoff

We run a duct inspection camera through the main runs, photograph before-and-after conditions, and measure static pressure at the air handler to confirm the improvement. You receive a documentation packet with photos, debris volume, panel locations and recommended re-clean intervals. Final walkthrough takes about 30 minutes with your maintenance lead.

Tools & methods

Equipment and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Negative Air Machine

Pulls the entire duct system under negative pressure during cleaning so debris travels toward the collection point instead of into occupied space. Sized to the duct volume of the building.

HEPA Vacuum

Captures fine particulate at 99.97 percent efficiency at 0.3 microns. Staged at collection points to trap dust, mold spores and rodent debris that would otherwise escape containment.

Rotary Brush System

Motorized brush head on a flexible shaft that scrubs caked debris off sheet metal duct walls. The workhorse tool for industrial trunk lines and heavy buildup.

Air Whip and Compressed Air Nozzle

Forward- and reverse-facing air jets that scour flexible duct and tight radius runs where a brush cannot safely travel. Used on DuctSox fabric runs and small-diameter branches.

Duct Inspection Camera

Records the interior condition of the duct before, during and after cleaning. The footage becomes your documentation and confirms the cleaning reached every branch.

Fogger

Applies EPA-registered antimicrobial treatment to duct surfaces after mechanical cleaning when mold growth in ductwork or pest contamination is present. Not a substitute for cleaning, a final step.

Blower Door

Measures envelope leakage and helps verify that the duct system is not losing conditioned air through unsealed joints. Used on commercial buildings where energy performance matters.

Real results

Before and after.

Manufacturing Plant Static Pressure Recovery

Before

A 60,000 square foot manufacturing plant off the Corporate Drive Corridor had static pressure at 1.4 inches on the main air handler and could not hold temperature setpoints in the summer. Duct interior showed heavy metal shaving and dust buildup on the trunk lines.

After

After a two-night cleaning, static pressure dropped to 0.9 inches. Supply airflow increased by 22 percent. The plant held setpoint through the following August without adding a rooftop unit.

Warehouse Rodent Contamination Removal

Before

A warehouse on the north side of Lewisville discovered rodent droppings in the return ductwork after a January cold snap. Two flexible duct runs had been chewed through, and nesting material was blocking a branch line serving the office area.

After

Emergency crew removed the nesting material with HEPA vacuum containment, replaced both damaged flexible duct runs, and fogger-treated the affected branches. Airflow to the office area was restored within 24 hours.

Food Facility Audit Preparation

Before

A food-adjacent facility in the 75057 ZIP code had flour and starch residue caked on the duct walls and an audit scheduled in three weeks. The evaporator coils were also fouled, driving high discharge temperatures.

After

Weekend cleaning removed the caked residue from all trunk and branch lines. Coil cleaning HVAC service in the same visit dropped discharge temperature by 14 degrees. The audit passed with no duct-related findings.

Problems we solve

Industrial Duct Problems We Solve in Lewisville

Most industrial duct calls start with one of these four symptoms. Each one has a different fix, and getting the diagnosis right is half the job.

Ask a pro →
01

Restricted airflow and rising static pressure

We measure static pressure at the air handler, camera the trunk lines to find the blockage, and mechanically clean the duct back to design airflow. Most Lewisville plants recover 15 to 25 percent of lost airflow in a single visit, and we document the before-and-after readings.

↗
02

Pest and rodent nesting in the ductwork

We remove nesting material with HEPA vacuum containment, treat the affected runs with a fogger where needed, and replace any flexible duct that has been chewed through. Access panels get sealed tight so the problem does not recur. Full documentation goes to your insurer.

↗
03

Mold growth in ductwork after a leak or humidity event

We camera the system to map the growth, clean affected runs mechanically, apply an EPA-registered fogger treatment, and correct the moisture source. If the growth is in the evaporator coil, we add coil cleaning HVAC service in the same visit.

↗
04

Visible dust and haze in the work area

We clean the duct system, upgrade HEPA filters where the existing filtration is undersized, and verify the return air path is pulling from the right zones. Most facilities see visible dust reduction within 48 hours of the cleaning.

↗
Proof you can check

Certifications and Reviews

✓
NADCA Air Systems Cleaning Specialist (ASCS)National Air Duct Cleaners Association
✓
NADCA Certified Ventilation Inspector (CVI)National Air Duct Cleaners Association
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
OSHA 10Occupational Safety and Health Administration
✓
NATE CertificationNorth American Technician Excellence
Good questions

Frequently Asked Questions

(214) 644-8299 →

Most industrial jobs in Lewisville run $1,800 to $12,000 in 2026, with the average mid-size warehouse landing around $4,500. Price is driven by linear footage of duct, number of air handlers, access difficulty and whether coil cleaning is bundled in. A 20,000 square foot building with two rooftop units sits at the low end; a 150,000 square foot plant with fabric duct and multiple exhaust risers sits at the top. We quote firm numbers after the walkthrough.

Most manufacturing and warehouse facilities in Lewisville should be cleaned every 12 to 24 months. Plants generating heavy dust, metal shavings or food particulate need the 12-month cycle; cleaner assembly or office-warehouse hybrids can stretch to 24 months. If you have had a rodent or pest issue, a roof leak or a fire, clean immediately regardless of the calendar. NADCA guidance ties frequency to contamination level, not just time.

Yes. We hold same-day and next-day slots for industrial duct cleaning near me Lewisville calls, and we run 24/7 for emergency situations like a rodent infestation discovered in the returns or a post-fire smoke contamination. Call (214) 644-8299 and tell us the building size and the problem. Most emergency scopes get a crew on site within 24 hours, and we can work nights or weekends to avoid production downtime.

A standard job covers containment setup, mechanical cleaning of all supply, return and exhaust ductwork, HEPA vacuuming, coil cleaning, access panel installation and resealing, and a final documentation packet with before-and-after photos and static pressure readings. Add-ons include dryer vent lint blockage clearing, fogger treatment for mold growth in ductwork, and full indoor air quality services. We list every inclusion in the written scope so nothing is a surprise.

Ready when you are

Book Industrial Air Duct Cleaning in Lewisville This Week

NADCA-certified crews, documented results, and scheduling that works around your production. Call (214) 644-8299 and we will walk your facility, quote a firm price and put a crew on the calendar. Same-day and 24/7 slots available for emergencies across Denton County.

Get a Free Quote (214) 644-8299 →
Request an appointment

Get your duct cleaning quote

Call us at (214) 644-8299 and you will talk to a real person, not a call center. We answer weekdays from 8 a.m. to 6 p.m., and our on-call tech takes emergency calls around the clock. Most quotes take five minutes on the phone, and same-day appointments are usually available if you call before noon.

Request received — our team will be in touch shortly.
Tap to call(214) 644-8299